Using Breadboard & ICSP

Using Breadboard & ICSP

	Purchase a 40-pin male header from any electronic stores.
	Cut 5 pins and set aside the remaining 35 pins.
	Push the pins upward/downward by holding the black plastic until it is half.
	Put the PIC and the pushed 5-pin header on the breadboard.
	Create a connection from the 5-pin header to the PIC according to required PINS.
	You can now connect your programmer to your breadboard.
	You can also use solid wires to connect to your PICs instead of the 5-pin header stated above.)